Cx-supervisor to pc comunication

[Guest www.iespana.es/automatizacion]

Hello I have a problem with the cx supervisor.   I have connected a plc c200hg to a pc (scada) by a cable rs232.  Im using rs232 cpu´s plc port. The comunicacion is very slow.Aque is able to owe?   Sorry for my english. Thaks David

[Jay Anthony 118]

How many points in the CX Server database? What is the response time from the time you click on a command button until an output comes on in the PLC? Are you updating all the time or just on change in I/O status? Tell me more about what slow is.  :-3 ____ ¿Cuántos puntos en la base de datos de Camarero de CX? ¿Qué es el tiempo de la respuesta del tiempo que usted chasquea en un botón de la orden hasta que una salida venga en en el PLC? ¿Actualiza usted todo el tiempo o apenas en cambio en la posición de E/S? Dígame más acerca de qué lento es.  :-3

[Guest www.iespana.es/automatizacion]

Hello I,m use 100 +- points. I think the proble is I don,t use "Array". The comunication is very slow (5 or 6 seconds). Im tray to do thing, use Array. Now i´m trasmit for example: 1 Point Dm1000  Refres 1 secons 1 Point Dm1001 Refres 1 secons 1 Point Dm1002 Refres 1 secons 1 Point Dm1003 Refres 1 secons ... For do this trasmition i can use array. Thanks an write you son David

[Guest I1450H]

I had the same problem with very very slow responces. I have found that comm to PLC must be VIA Ethernet.

[BobB 58]

Why not Controller Link? Cheaper than Ethernet.